That it concerns low beam, high beams or turn signals, the changing a light bulb is an extremely manipulation convenient to do . But if ever a fire does not work any more, it should not be delayed to repair it. Because some people ignore it, but this remains punishable by a sanction of up to 68 euros. Obviously, you will first have to repair them for safety reasons. Here is therefore how to change the bulb of a headlight on your Hyundai I-blue, point by point. Second, we will find out how to properly adjust them.
How to replace the bulb of a Hyundai I-blue headlight
Nowadays, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , a little neglected now, and more and more bulbs LED . They are less energy intensive and more enduring. Regardless of the type of bulb, the way to replace them will be the same. You will find below the procedure to follow in order to change the bulb of your Hyundai I-blue .
- Disconnect the battery to work more comfortably.
- Clear access to the rear portion of the light. From time to time it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb of the Hyundai I-blue
- Compare it well with the new one to make sure it is suitable
- Place the new bulb gently, then fix it properly
- Reclip the rubber cover then all the elements following the reverse procedure
Now that everything is in place, test the bulb! The latter should display the same intensity as the other. It is essential to have completely identical models.
How to set the headlights of a Hyundai I-blue
After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and focused in the same way. In particular so as not to annoy the drivers in the other direction. This is why they must be properly regulated. To do this, you have to position your car facing a wall. To start with one meter from the wall, then five or six meters. In the second place, it is enough to adjust the light with the new bulb in the same way as the other according to the reflections on the wall. If the two are badly set, there are some very well done tutorials on this subject.