Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a super manipulation convenient to perform . But if a light does not work, you should not wait to replace it. Because many do not know it, but it is condemnable by a sanction which can go up to 68 euros. Obviously, you will have to start repairing them for security reasons. So here is how to change the headlight bulb on a Hyundai I-mode, point by point. Second, we will see how to properly adjust them.
How to replace the bulb of a Hyundai I-mode headlight
Now there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly put on the side now, and lots of bulbs LED . These are much less energy consuming and more resistant. Whatever the type of bulb, the way to replace them will be similar. You will find below the logic to follow in order to change the bulb of your Hyundai I-mode .
- Disconnect the battery in order to work more quietly.
- Free access to the rear portion of the fire. It will be necessary from time to time to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the broken bulb of the Hyundai I-mode
- Compare it well with the new one to be certain that it is suitable
- Position the new bulb gently, then fix it properly
- Replace the rubber cover and all of the components, following the reverse procedure
Now that everything is back in order, check that it works! This should display an intensity equal to the other. It is essential to have perfectly similar models.
Configure the headlights of a Hyundai I-mode
After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. In particular so as not to obstruct the conductors in the other direction. That is why they must be settled properly. To do this, simply position your vehicle facing a wall. To start one meter from the wall, then 5 or 6 meters. Secondly, just adjust the fire with the new bulb in the same way as the other according to the reflections on the wall. If the two are incorrectly adjusted, there are tutorials that can help you.