That it concerns low beam, high beams or turn signals, the changing a light bulb is a very repair convenient to perform . But in case a fire does not work, it should not be long to change it. Because some people do not know it, but it remains reprehensible by a fine of up to 68 euros. Of course, you will have to change them for safety reasons first. This is how you can change the headlight bulb on your hyundai i40, point by point. In a second step, we will see how to correctly adjust them.change-bulb-headlight-hyundai-i40

How to replace the bulb of a headlight of hyundai i40

Nowadays, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side now, and a lot of bulbs LED . They consume less electricity and are more resistant. Regardless of the type of bulb, the way to replace them will be the same. Here is the procedure to follow for change the bulb in your hyundai i40 .

  • Disconnect the battery to work more comfortably.
  • Free access to the rear portion of the fire. It will be necessary to dismantle the battery from time to time, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the damaged bulb from your hyundai i40
  • Compare it with the new one to make sure it is suitable
  • Position the new bulb gently, then fix it correctly
  • Reclip the rubber cover and all the elements in the other direction

Now that everything is in order, test the bulb! This should have an intensity similar to the other. It is essential to have completely identical models.

Configure the headlights of a Hyundai i40

After replacing a light, it remains plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. In particular not to annoy motorists opposite. They should therefore be adjusted correctly. To do this, you must position your vehicle facing a wall. First one meter from the wall, then a few meters. In a second step, you will just have to adjust the fire in question in the same way as the other by comparing the halos. If the two are incorrectly adjusted, there are tutorials that can help you.