Whether it's for low beam, high beams or turn signals, the changing a light bulb is a super operation easy to make . But if a fire does not work, you should not wait to replace it. Because some people do not know it, but it is punishable by a fine which can go up to 68 euros. Of course, you must first of all change them for security reasons. So here is how to change the bulb of a headlight on the Hyundai Ioniq, step by step. Then we will find out how to set them correctly.
How to replace the bulb of a Hyundai Ioniq headlight
Nowadays, there are various types of headlight bulbs. The most common are halogen , but we can also find Xenon , slightly put on the side now, and more and more bulbs LED . These are much less greedy in electricity and more enduring. Whatever the type of bulb, the way to replace them will be identical. You will find below the logic to follow for change the bulb of your Hyundai Ioniq .
- Disconnect the battery so that you can work more comfortably.
- Clear access to the rear part of the light. From time to time it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the defective bulb of your Hyundai Ioniq
- Compare it with the news to make sure it matches
- Position the new bulb gently, then fix it correctly
- Replace the rubber cover then all the elements in reverse
Now that everything is back in order, check that it works! This one should have the same intensity as the other. It is essential to have perfectly similar models.
How to properly configure the headlights of a Hyundai Ioniq
Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. Especially so as not to upset the drivers you meet. That's why you have to take the time to adjust them correctly. To do this, you must place your automobile in front of a wall. First a short distance, then a few meters. Then just set the fire in question in the same way as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.