That it concerns low beam, high beams or turn signals, the changing a light bulb is an extremely repair convenient to do . But when a fire does not work, it should not be delayed to replace it. Because some people forget it, but this is reprehensible by a fine of up to 68 euros. Obviously, you will first have to change them for security reasons. Here is therefore how to replace the headlight bulb on your Hyundai Ix-onic, step by step. Subsequently, we will see how to properly adjust them.
How to change the bulb of a Hyundai Ix-onic headlight
Now there are a number of types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly neglected now, and lots of bulbs LED . These are less energy intensive and more resistant. Regardless of the type of bulb, the way to change them will be the same. So here is the logic to follow for replace the bulb of your Hyundai Ix-onic .
- Disconnect the battery to work more quietly.
- Free access to the rear portion of the fire. At times it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the damaged bulb of the Hyundai Ix-onic
- Compare it well with the new one to make sure it is suitable
- Place the new bulb gently, then fix it correctly
- Reclip the rubber cover then all the elements in the other direction
Now that everything is back in order, check that it works! The latter should have a similar intensity to the other. It is important to have completely identical models.
How to adjust the headlights of a Hyundai Ix-onic
After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused in the same way. Notably so as not to annoy the drivers opposite. They must therefore be adjusted correctly. To do this, you just have to position your car in front of a wall. First a short distance, then a few meters. Then, you just have to adjust the light with the new bulb at the same height as the other by comparing the halos. If the two are badly set, there are some very well done tutorials on this subject.