Whether it's for low beam, high beams or turn signals, the changing a light bulb is a super repair simple to do . But when a fire does not work, you should not wait to replace it. Because some people forget it, but this is condemnable by a ticket which can go up to 68 euros. Naturally, you are going to have to start repairing them for safety reasons. Here is therefore how to change the bulb of a headlight on the Hyundai Ix20, point by point. Thereafter, we will see how to correctly adjust them.change-bulb-headlight-Hyundai-Ix20

How to replace the bulb of a Hyundai Ix20 headlight

Today there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly put on the side today, and a lot of bulbs LED . These are much less energy intensive and more resistant. Regardless of the type of bulb, the way to replace them will be similar. Here is the procedure to follow in order to change the bulb in your Hyundai Ix20 .

  • Disconnect the battery to work more comfortably.
  • Clear access to the rear portion of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the faulty bulb from the Hyundai Ix20
  • Compare it with the new one to be sure it is suitable
  • Position the new bulb gently, then fix it correctly
  • Reclip the rubber cover then all the elements in reverse

Once everything is in place, test the bulb! The latter should have an intensity similar to the other. It is essential to have completely identical models.

How to set the headlights of a Hyundai Ix20

Now that the fire is in place, it is plausible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to hinder motorists in the other direction. They must therefore be set correctly. To do this, you must position your vehicle facing a wall. To start one meter from the wall, then a few meters. Thereafter, you will just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If neither goes, there are very good tutorials on this.