Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a very operation convenient to do . But if a fire does not work, do not wait to change it. Because some people forget it, but it is reprehensible by a sanction which can go up to 68 euros. Obviously, they must first be changed for safety reasons. This is how to replace the bulb of a headlight on your Hyundai Ix35, point by point. Second, we will see how to properly adjust them.
How to change the bulb of a Hyundai Ix35 headlight
Today, there are a number of types of headlight bulbs. The most common are halogen , but we can also find Xenon , a little put on the side today, and a lot of bulbs LED . These are much less greedy in electricity and more resistant. Regardless of the type of bulb, the way to change them will be similar. So here is the procedure to follow for replace the bulb in your Hyundai Ix35 .
- Disconnect the battery in order to work more serenely.
- Free access to the rear part of the light. It will be necessary to dismantle the battery from time to time, or covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the broken bulb of the Hyundai Ix35
- Compare it well with the news to make sure it fits
- Place the new bulb gently, then fix it properly
- Replace the rubber cover then all the elements following the reverse procedure
Now that everything is in place, check that it works! This one should have the same intensity as the other. It is essential to have completely identical products.
Configure the headlights of a Hyundai Ix35
After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. In particular not to annoy the motorists opposite. That is why they must be settled properly. To do this, simply position your vehicle facing a wall. First a short distance, then a few meters. Second, you just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither goes, there are tutorials that can help you.