Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely convenient to execute . But in case a fire does not work, it should not be long to change it. Because some people forget it, but it remains reprehensible with a fine of up to 68 euros. Naturally, you will have to replace them first for safety reasons. Here is how to change the bulb of a headlight on your Hyundai Ix55, step by step. In a second step, we will find out how to properly adjust them.change-bulb-headlight-Hyundai-Ix55

How to replace the bulb of a Hyundai Ix55 headlight

Now there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side today, and more and more bulbs LED . They consume much less energy and are more resistant. Whatever kind of bulb, the way to replace them will be similar. You will find below the logic to follow for change the bulb in your Hyundai Ix55 .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear portion of the fire. Sometimes it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the broken bulb of your Hyundai Ix55
  • Compare it well with the new one to make sure it is suitable
  • Position the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements following the reverse procedure

Now that everything is in order, check that it works! The latter should have an intensity similar to the other. It is important to have perfectly similar models.

How to adjust the headlights of a Hyundai Ix55

Now that the fire is in place, it remains possible that it is out of order. It is extremely important that two lights at the same height and focused the same way. In particular not to upset motorists in the other direction. So take the time to settle them properly. To do this, you must place your car facing a wall. First a short distance, then 5 or 6 meters. In a second step, simply adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are wrong, there are tutorials that can help.