Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a very repair convenient to execute . But in case a fire does not work, it should not be long to replace it. Because many ignore it, but this is reprehensible by a fine of up to 68 euros. Obviously, it is first of all necessary to replace them for safety reasons. So here is how to change the bulb of a headlight on your Hyundai Kona, step by step. In a second step, we will see how to properly adjust them.change-bulb-headlight-Hyundai-Kona

How to replace the bulb of a Hyundai Kona headlight

Now there are several types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly put on the side now, and more and more bulbs LED . They consume much less electricity and are more robust. Regardless of the type of bulb, the way to replace them will be the same. So here is the procedure to follow for change the bulb in your Hyundai Kona .

  • Disconnect the battery so that you can work more comfortably.
  • Free access to the rear part of the light. It will be necessary from time to time to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Unclip or unscrew the faulty bulb from the Hyundai Kona
  • Compare it with the new one to be sure it matches
  • Position the new bulb gently, then fix it properly
  • Reclip the rubber cover and all the components in the other direction

Once everything is in place, check that it works! The latter should have the same intensity as the other. It is essential to have perfectly identical products.

How to properly configure the headlights of a Hyundai Kona

After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and in the same axis. In particular not to disturb the drivers you meet. That is why they must be settled properly. To do this, simply position your car in front of a wall. To start one meter from the wall, then a few meters. In a second step, it is enough to adjust the fire in question at the same height as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.