That it concerns low beam, high beams or turn signals, the changing a light bulb is a very repair easy to do . But when a fire stops working, you don't have to wait to fix it. Because some people forget it, but it remains punishable by a fine of up to 68 euros. Naturally, it is necessary to start repairing them for safety reasons. Here is how you can replace the headlight bulb on your hyundai lantra, step by step. In a second step, we will see how to properly adjust them.change-bulb-headlight-hyundai-lantra

How to replace the bulb of a headlight of hyundai lantra

Now there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly neglected now, and lots of bulbs LED . These are much less energy intensive and more robust. Whatever the type of bulb, the way to replace them will be similar. You will find below the procedure to follow in order to replace the bulb in your hyundai lantra .

  • Disconnect the battery so that you can work more comfortably.
  • Clear access to the rear portion of the light. From time to time it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the broken bulb from your hyundai lantra
  • Compare it well with the news to be sure it fits
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements in the other direction

Now that everything is in place, check that it works! The latter should have the same intensity as the other. It is important to have completely similar products.

How to set the headlights of a hyundai lantra

Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to obstruct the conductors in the other direction. So take the time to settle them properly. To do this, simply place your automobile facing a wall. First a short distance, then a few meters. In a second step, you will just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If the two are wrong, there are tutorials that can help.