Whether it's about the low beams, high beams or turn signals, the bulb replacement is a super operation simple to make . But in case a fire does not work, it should not be long to repair it. Because some people do not know it, but it is punishable by a fine which can go up to 68 euros. Of course, it will first of all have to be changed for safety reasons. So that's how to replace the headlight bulb on the Hyundai Olv, step by step. In a second step, we will see how to properly adjust them.changing-headlight-bulb-Hyundai-Olv

How to replace the bulb of a Hyundai Olv headlight

Now there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side today, and a lot of bulbs LED . These are much less energy consuming and more robust. Regardless of the type of bulb, the way to replace them will be similar. So that's the logic to follow for replace the bulb in your Hyundai Olv .

  • Disconnect the battery so that you can work more serenely.
  • Free access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the faulty bulb from the Hyundai Olv
  • Compare it with the new one to be sure it fits
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover then all the elements in reverse

Once everything is in order, check that it works! This one should have the same intensity as the other. It is important to have totally similar models.

Adjusting the headlights of a Hyundai Olv

Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to hinder motorists in the other direction. It is therefore advisable to take the time to settle them properly. To do this, you must place your car in front of a wall. First one meter from the wall, then 5 or 6 meters. In a second step, it suffices to adjust the light in question to the same height as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.