That it concerns low beam, high beams or turn signals, the changing a light bulb is an extremely repair simple to make . But if a light stops working, it should not be long before replacing it. Because many are unaware of it, but that remains condemnable by a fine which can go up to 68 euros. Obviously, they must first be repaired for security reasons. So that's how to change the bulb of a headlight on a Hyundai Pony, point by point. Next, we will find out how to properly adjust them.change-bulb-headlight-Hyundai-Pony

How to change the bulb of a Hyundai Pony headlight

Now there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly put on the side now, and more and more bulbs LED . They consume much less energy and are more enduring. No matter what kind of bulb, the way to change them will be the same. Here is the logic to follow in order to changing the bulb of your Hyundai Pony .

  • Disconnect the battery to work more comfortably.
  • Free access to the rear portion of the fire. At times it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the damaged bulb of your Hyundai Pony
  • Compare it well with the news to be sure it matches
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover and all the components following the reverse procedure

Now that everything is back in order, check that it works! This should display an intensity similar to the other. It is essential to have perfectly similar models.

How to adjust the headlights of a Hyundai Pony

Now that the fire is in place, it is possible that it is out of order. It is extremely important that two lights at the same height and in the same axis. In particular so as not to annoy the conductors opposite. They should therefore be adjusted properly. To do this, you must place your vehicle facing a wall. First one meter from the wall, then 5 or 6 meters. Then, you just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither of them goes, there are tutorials very well done on this subject.