That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely repair simple to perform . But when a fire does not work, it should not be long to change it. Because some people do not know it, but it remains reprehensible by a fine of up to 68 euros. Naturellemnt, they must first be replaced for safety reasons. So here is how to replace the headlight bulb on your hyundai santa fe, step by step. Then we will see how to properly adjust them.change-bulb-headlight-hyundai-santa-fe

How to Replace the Bulb in a Hyundai Santa Fe Headlight

Today there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly neglected now, and more and more bulbs LED . These are much less energy consuming and more resistant. Whatever the type of bulb, the way to replace them will be similar. You will find below the procedure to follow in order to replace the bulb in your hyundai santa fe .

  • Disconnect the battery to work more comfortably.
  • Clear access to the rear portion of the light. From time to time it will be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fastener or unscrew the broken bulb from the hyundai santa fe
  • Compare it with the news to make sure it matches
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover and all the components following the reverse procedure

Now that everything is in order, test the bulb! This one should have the same intensity as the other. It is important to have perfectly identical models.

How to set the headlights of a hyundai santa fe

After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to obstruct the conductors in the other direction. So take the time to settle them properly. To do this, you just have to place your car facing a wall. To start a short distance, then a few meters. Then just adjust the fire with the new bulb in the same way as the other by comparing the halos. If neither of them goes, there are tutorials that can help you.