That it concerns low beam, high beams or turn signals, the changing a light bulb is a super repair easy to perform . But if a fire no longer works, it should not be long before changing it. Because many ignore it, but this remains punishable by a fine of up to 68 euros. Naturellemnt, it is necessary before all to replace them for questions of safety. Here is how to change the bulb of a headlight on the Hyundai Satellite, step by step. In the second step, we will find out how to properly resolve them.
How to Replace a Hyundai Satellite Headlight Bulb
Today, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly neglected today, and more and more bulbs LED . They consume much less electricity and are more robust. Regardless of the type of bulb, the way to replace them will be the same. Here is the logic to follow in order to changing the bulb of your Hyundai Satellite .
- Disconnect the battery in order to work more quietly.
- Free access to the rear portion of the fire. From time to time it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover on the back of the fire
- Remove the fixing or unscrew the defective bulb from your Hyundai Satellite
- Compare it with the new one to make sure it fits
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all the elements following the reverse procedure
Once everything is in order, check that it works! This should have an intensity similar to the other. It is important to have perfectly identical products.
Adjusting the headlights of a Hyundai Satellite
Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and in the same axis. In particular not to annoy the drivers you meet. They must therefore be settled properly. To do this, you must position your automobile facing a wall. To start one meter from the wall, then a few meters. In a second step, it is enough to adjust the fire with the new bulb at the same height as the other by comparing the halos. If the two are incorrectly adjusted, there are tutorials that can help you.