Whether it's for low beam, high beams or turn signals, the bulb replacement is a very operation easy to perform . But if a fire does not work, it should not be long to repair it. Because many forget it, but it is condemnable by a fine of up to 68 euros. Obviously, they must first be changed for security reasons. Here is how you can change the headlight bulb on your hyundai sonata, step by step. Secondly, we will see how to correctly adjust them.change-bulb-headlight-hyundai-sonata

How to change the bulb of a Hyundai Sonata headlight

Now there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side now, and more and more bulbs LED . They consume much less electricity and are more resistant. Whatever the type of bulb, the way to change them will be similar. So here is the logic to follow in order to change the bulb of your hyundai sonata .

  • Disconnect the battery in order to work more serenely.
  • Clear access to the rear part of the light. From time to time it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Remove the fixing or unscrew the damaged bulb from the Hyundai Sonata
  • Compare it with the new one to be sure it is suitable
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements in the other direction

Now that everything is in order, test the bulb! The latter should have the same intensity as the other. It is important to have completely identical products.

Configure the headlights of a Hyundai Sonata

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. In particular not to annoy the drivers in the other direction. That is why they must be set correctly. To do this, you must position your vehicle in front of a wall. First one meter from the wall, then 5 or 6 meters. Secondly, just adjust the light with the new bulb to the same height as the other by comparing the halos. If neither goes, there are tutorials that can help you.