Whether it's for low beam, high beams or turn signals, the bulb replacement is a very operation convenient to perform . But when a light does not work, you should not wait to replace it. Because some people forget it, but it remains punishable by a fine of up to 68 euros. Naturally, you are going to have to start replacing them for safety reasons. Here is therefore how to change the bulb of a headlight on the Hyundai route, step by step. In a second step, we will see how to correctly adjust them.
How to Change the Bulb of a Hyundai Path Headlight
Today, there are a number of types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly put on the side now, and lots of bulbs LED . They consume much less electricity and are more enduring. Regardless of the type of bulb, the way to change them will be similar. So here is the procedure to follow for change the bulb of your hyundai ride .
- Disconnect the battery so that you can work more serenely.
- Free access to the rear portion of the fire. At times it will be necessary to disassemble the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the damaged bulb from your hyundai journey
- Compare it well with the new one to make sure it is suitable
- Position the new bulb gently, then fix it correctly
- Replace the rubber cover and all the elements in the other direction
Now that everything is in place, test the bulb! The latter should have the same intensity as the other. It is essential to have perfectly similar products.
How to set the headlights of a Hyundai trip
After replacing a light, it remains plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. In particular not to annoy the conductors opposite. That's why you have to take the time to adjust them correctly. To do this, you must position your automobile facing a wall. First a short distance, then a few meters. In a second step, you just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If neither goes, there are tutorials very well done on this subject.