That it concerns low beam, high beams or turn signals, the changing a light bulb is a super repair easy to execute . But if a fire does not work, you should not wait to replace it. Because many forget it, but this remains reprehensible by a penalty which can go up to 68 euros. Of course, it is necessary to start changing them for security reasons. Here is how to replace the headlight bulb on a hyundai tucson, step by step. In a second step, we will see how to correctly adjust them.change-bulb-headlight-hyundai-tucson

How to Replace the Bulb in a Hyundai Tucson Headlight

Today there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , a little neglected now, and more and more bulbs LED . The latter consume much less electricity and are more resistant. Regardless of the type of bulb, the way to replace them will be the same. You will find below the logic to follow for replace the bulb in your hyundai tucson .

  • Disconnect the battery in order to work more comfortably.
  • Clear access to the rear portion of the light. At times it will be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the damaged bulb from your hyundai tucson
  • Compare it with the new one to be sure it fits
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover and all components in the opposite direction

Once everything is in place, check that it works! The latter should display the same intensity as the other. It is essential to have perfectly identical models.

Configure the headlights of a Hyundai Tucson

After replacing a light, it remains plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. In particular not to annoy the motorists opposite. That's why you have to take the time to adjust them correctly. To do this, simply position your automobile facing a wall. First a short distance, then a few meters. In a second step, you will just have to adjust the light with the new bulb at the same height as the other by comparing the halos. If neither of them goes, there are tutorials very well done on this subject.