That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely repair easy to make . But when a fire no longer works, you should not wait to change it. Because some people ignore it, but this is reprehensible by a penalty of up to 68 euros. Of course, you will have to start changing them for safety reasons. This is therefore how to change the bulb of a headlight on a Hyundai Veloster, point by point. Next, we will find out how to properly adjust them.changing-headlight-bulb-Hyundai-Veloster

How to replace the bulb of a Hyundai Veloster headlight

Nowadays, there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , put on the side now, and more and more light bulbs LED . The latter consume less electricity and are more resistant. Regardless of the type of bulb, the way to replace them will be similar. So that's the logic to follow for changing the bulb of your Hyundai Veloster .

  • Disconnect the battery so that you can work more comfortably.
  • Clear access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the broken bulb of the Hyundai Veloster
  • Compare it with the news to make sure it fits
  • Position the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements following the reverse procedure

Now that everything is in place, check that it works! This one should have an intensity equal to the other. It is essential to have totally similar models.

How to set the headlights of a Hyundai Veloster

Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to annoy the drivers in the other direction. They should therefore be adjusted properly. To do this, you just have to position your automobile in front of a wall. First a meter from the wall, then a few meters. Then, you just have to adjust the fire in question in the same way as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.