That it concerns low beam, high beams or turn signals, the changing a light bulb is a very manipulation simple to do . But in the event that a fire no longer works, it should not be delayed to replace it. Because some people are unaware of it, but it remains reprehensible by a sanction which can go up to 68 euros. Of course, you will have to change them first for safety reasons. Here is therefore how to replace the bulb of a headlight on an iveco daily, step by step. In the following, we will find out how to properly adjust them.
How to change the bulb of an iveco daily headlight
Now there are a number of types of headlight bulbs. The most common are halogen , however we can also find Xenon , somewhat neglected today, and more and more light bulbs LED . These are much less power hungry and more resistant. Regardless of the type of bulb, the way to change them will be the same. So here is the process to follow for replace the bulb of your iveco daily .
- Disconnect the battery so that you can work more comfortably.
- Clear access to the rear portion of the light. It will sometimes be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the broken bulb from the iveco daily
- Compare it well with the news to make sure it matches
- Place the new bulb gently, then fix it correctly
- Replace the rubber cover and all the elements in the other direction
Once everything is back to normal, test the bulb! This one should have the same intensity as the other. It is essential to have completely similar products.
Setting up the headlights of an iveco daily
After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. In particular so as not to disturb the drivers in front. This is why they must be set correctly. To do this, simply position your automobile facing a wall. First a short distance, then 5 or 6 meters. Then, you just have to adjust the light with the new bulb at the same height as the other by comparing the halos. If the two are badly set, there are some very well-made tutorials on this subject.