Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely manipulation convenient to make . But if a fire never works again, it should not be long before replacing it. Because some people do not know it, but it remains condemnable by a ticket which can go up to 68 euros. Naturellemnt, it is necessary before all to change them for questions of safety. This is therefore how to replace the headlight bulb on an Iveco Eurocargo, point by point. In a second step, we will find out how to set them correctly.changing-headlight-bulb-Iveco-Eurocargo

How to replace the bulb of a Iveco Eurocargo headlight

Now there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat neglected now, and lots of bulbs LED . These are much less greedy in electricity and more enduring. Whatever kind of bulb, the way to replace them will be similar. So that's the logic to follow for replace the bulb of your Iveco Eurocargo .

  • Disconnect the battery so that you can work more quietly.
  • Clear access to the rear portion of the light. It will sometimes be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the broken bulb of your Iveco Eurocargo
  • Compare it well with the new one to be sure it fits
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover then all the elements following the reverse procedure

Once everything is in order, test the bulb! The latter should have an intensity similar to the other. It is essential to have perfectly identical models.

Configure the headlights of an Iveco Eurocargo

After replacing a light, it is still possible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to annoy motorists opposite. So take the time to set them correctly. To do this, you must position your vehicle in front of a wall. First a short distance, then a few meters. In a second step, it is enough to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither of them goes, there are tutorials that can help you.