That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely simple to make . But in the event that a fire does not work, it should not be delayed to replace it. Because many forget it, but this is reprehensible by a fine which can go up to 68 euros. Of course, you need to replace them first for safety reasons. Here is how to change the bulb of a headlight on an Iveco Massif, point by point. In a second step, we will see how to correctly adjust them.change-headlight-bulb-Iveco-Massif

How to change the bulb of an Iveco Massif headlight

Today there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected now, and lots of bulbs LED . These are much less power hungry and more enduring. Regardless of the type of bulb, the way to change them will be similar. So here is the process to follow for change the bulb of your Iveco Massif .

  • Disconnect the battery so that you can work more serenely.
  • Free access to the rear portion of the fire. Sometimes it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the damaged bulb from the Iveco Massif
  • Compare it well with the new one to be sure that it is suitable
  • Place the new bulb gently, then fix it correctly
  • Reclip the rubber cover and all of the elements by following the reverse procedure

Now that everything is back in order, test the bulb! This one should display a similar intensity to the other. It is important to have perfectly identical models.

How to set the headlights of an Iveco Massif

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and focused in the same way. Among other things, so as not to interfere with the drivers you meet. You must therefore take the time to adjust them correctly. To do this, simply place your vehicle facing a wall. At first one meter from the wall, then a few meters. Secondly, you just have to adjust the light with the new bulb in the same way as the other according to the reflections on the wall. If neither of the two works, there are some very well-done tutorials on this.