Whether it's about the low beams, high beams or turn signals, the changing a light bulb is an extremely manipulation easy to execute . But in the event that a fire no longer works, we must not wait to repair it. Because some people ignore it, but it remains reprehensible by a sanction which can go up to 68 euros. Of course, you will have to change them first for security reasons. Here is therefore how to change the headlight bulb on an Iveco Minicab, step by step. Subsequently, we will see how to properly adjust them.
How to replace the bulb of an Iveco Minicab headlight
Nowadays, there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , somewhat put on the side now, and lots of bulbs LED . They consume less electricity and are more resistant. Regardless of the type of bulb, the way to replace them will be similar. So this is the logic to follow in order to change the bulb of your Iveco Minicab .
- Disconnect the battery so that you can work more serenely.
- Free access to the rear part of the light. Sometimes it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the defective bulb from the Iveco Minicab
- Compare it well with the new one to make sure it is suitable
- Put the new bulb down gently, then fix it correctly
- Replace the rubber cover and all of the components, following the reverse procedure.
Once everything is back to normal, test the bulb! The latter should have a similar intensity to the other. It is essential to have completely similar models.
How to set the headlights of an Iveco Minicab
Now that the fire is in place, it is possible that it has been disturbed. It is extremely important that two lights at the same height and in the same axis. Notably so as not to annoy motorists in the other direction. You must therefore take the time to adjust them correctly. To do this, all you have to do is position your car facing a wall. First a meter from the wall, then a few meters. Subsequently, it suffices to adjust the fire in question to the same height as the other by comparing the halos. If the two are set incorrectly, there are some really well-made tutorials out there.