Whether it's for low beam, high beams or turn signals, the bulb replacement is a super operation convenient to perform . But if a fire stops working, you should not wait to repair it. Because some people do not know it, but it remains punishable by a fine of up to 68 euros. Obviously, you will first have to repair them for safety reasons. So here is how to change the bulb of a headlight on a Jeep Cj7, step by step. Next, we will find out how to properly adjust them.change-bulb-headlight-Jeep-Cj7

How to replace the bulb of a Jeep Cj7 headlight

Today there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , a little put on the side today, and a lot of bulbs LED . The latter consume less electricity and are more resistant. Whatever the type of bulb, the way to replace them will be identical. You will find below the procedure to follow in order to change the bulb of your Jeep Cj7 .

  • Disconnect the battery to work more comfortably.
  • Clear access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the damaged bulb of your Jeep Cj7
  • Compare it with the new one to make sure it is suitable
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover then all the components in the opposite direction

Now that everything is in order, test the bulb! The latter should have the same intensity as the other. It is essential to have completely identical models.

How to properly adjust the headlights of a Jeep Cj7

Now that the fire is in place, it remains plausible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to disturb the conductors opposite. They should therefore be adjusted properly. To do this, you just have to position your automobile facing a wall. To start one meter from the wall, then 5 or 6 meters. Then, you just have to adjust the fire in question in the same way as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.