Whether it's about the low beams, high beams or turn signals, the bulb replacement is a super operation simple to execute . But in case a fire does not work, it should not be long to replace it. Because some people do not know it, but it is reprehensible by a ticket which can go up to 68 euros. Naturally, they must first be changed for safety reasons. This is therefore how to change the bulb of a headlight on a Jeep Comanche, point by point. Second, we will find out how to properly adjust them.change-bulb-headlight-Jeep-Comanche

How to change the bulb of a Jeep Comanche lighthouse

Today, there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , a little put on the side now, and more and more bulbs LED . They consume much less electricity and are more enduring. Whatever kind of bulb, the way to change them will be similar. Here is the logic to follow in order to change the bulb of your Jeep Comanche .

  • Disconnect the battery so that you can work more quietly.
  • Free access to the rear portion of the fire. From time to time it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the damaged bulb from the Jeep Comanche
  • Compare it with the news to make sure it matches
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and then all of the components, following the reverse procedure.

Now that everything is in place, test the bulb! The latter should have the same intensity as the other. It is essential to have totally similar models.

How to configure the headlights of a Jeep Comanche

Now that the fire is in place, it may be out of order. It is very important that two lights at the same height and in the same axis. In particular not to disturb the drivers you meet. That is why they must be settled properly. To do this, you just have to position your vehicle in front of a wall. To start a short distance, then 5 or 6 meters. Second, you just have to adjust the fire in question at the same height as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.