That it concerns low beam, high beams or turn signals, the changing a light bulb is a super repair easy to make . But when a light no longer works, you should not wait to replace it. Because many ignore it, but it remains punishable by a fine which can go up to 68 euros. Obviously, they must first be replaced for security reasons. Here is how to replace the bulb of a headlight on the jeep compass, step by step. Next, we will find out how to properly adjust them.change-bulb-headlight-jeep-compass

How to replace the bulb of a jeep compass headlight

Today there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly put on the side now, and lots of bulbs LED . These are less energy intensive and more enduring. Regardless of the type of bulb, the way to replace them will be similar. Here is the procedure to follow in order to replace the bulb of your jeep compass .

  • Disconnect the battery in order to work more comfortably.
  • Free access to the rear portion of the fire. From time to time it will be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fastener or unscrew the broken bulb from your jeep compass
  • Compare it well with the new one to be sure that it is suitable
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements in the other direction

Now that everything is in order, test the bulb! The latter should have the same intensity as the other. It is essential to have totally similar products.

Adjust the headlights of a jeep compass

After replacing a light, it is still possible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to annoy the drivers you meet. It is therefore advisable to take the time to settle them properly. To do this, you must place your vehicle facing a wall. First a short distance, then 5 or 6 meters. Then just adjust the fire with the new bulb in the same way as the other by comparing the halos. If neither goes, there are very good tutorials on this.