That it concerns low beam, high beams or turn signals, the changing a light bulb is a very manipulation simple to perform . But if a fire stops working, it should not be long before replacing it. Because some people do not know it, but it is punishable by a fine of up to 68 euros. Obviously, you will have to replace them first for safety reasons. So here is how to change the bulb of a headlight on your Jeep Renegade, step by step. Then we will see how to correctly adjust them.
How to change the bulb of a Jeep Renegade headlight
Today, there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side today, and more and more bulbs LED . These are less energy intensive and more enduring. No matter what kind of bulb, the way to change them will be the same. So that's the logic to follow for change the bulb of your Jeep Renegade .
- Disconnect the battery so that you can work more serenely.
- Clear access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fastener or unscrew the damaged bulb from the Jeep Renegade
- Compare it with the news to make sure it is suitable
- Place the new bulb gently, then fix it correctly
- Replace the rubber cover and all the elements in reverse order
Now that everything is in order, check that it works! This one should have the same intensity as the other. It is essential to have perfectly similar products.
How to properly configure the headlights of a Jeep Renegade
Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to obstruct the conductors in the other direction. They must therefore be set correctly. To do this, you just have to position your vehicle facing a wall. First a short distance, then 5 or 6 meters. Then just set the fire with the new bulb in the same way as the other by comparing the halos. If the two are wrong, there are tutorials that can help you.