Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely manipulation easy to make . But if a fire no longer works, you should not wait to change it. Because some people ignore it, but it remains punishable by a penalty which can go up to 68 euros. Of course, it will first have to be replaced for safety reasons. Here is therefore how to change the headlight bulb on the Kia Carens 2, step by step. In the second step, we will find out how to set them correctly.change-bulb-headlight-Kia-Carens-2

How to replace the bulb of a Kia Carens 2 headlight

Today, there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , a little put on the side now, and a lot of bulbs LED . They consume less electricity and are more enduring. Regardless of the type of bulb, the way to replace them will be similar. You will find below the procedure to follow in order to change the bulb of your Kia Carens 2 .

  • Disconnect the battery so that you can work more comfortably.
  • Clear access to the rear portion of the light. It will sometimes be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the defective bulb from your Kia Carens 2
  • Compare it well with the new one to make sure it is suitable
  • Place the new bulb gently, then fix it correctly
  • Replace the rubber cover and all the elements following the reverse procedure

Now that everything is in place, test the bulb! This one should have an intensity equal to the other. It is essential to have perfectly similar models.

How to adjust the headlights of a Kia Carens 2

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to annoy the motorists you meet. It is therefore advisable to take the time to adjust them correctly. To do this, simply place your vehicle in front of a wall. First one meter from the wall, then 5 or 6 meters. In a second step, you will just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither of them goes, there are tutorials that can help you.