Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely repair easy to execute . But when a light does not work, you should not wait to replace it. Because some people ignore it, but it remains condemnable by a fine of up to 68 euros. Obviously, you will have to start replacing them for safety reasons. Here is how to change the bulb of a headlight on your Kia Carens, step by step. Thereafter, we will see how to correctly adjust them.
How to replace a Kia Carens headlight bulb
Today, there are several types of headlight bulbs. The most common are halogen , however we can also find Xenon , a little put on the side now, and more and more bulbs LED . These are much less energy consuming and more resistant. Regardless of the type of bulb, the way to replace them will be the same. You will find below the procedure to follow for change the bulb of your Kia Carens .
- Disconnect the battery so that you can work more serenely.
- Clear access to the rear portion of the light. At times it will be necessary to disassemble the battery, or else covers.
- Remove the rubber or plastic cover on the back of the fire
- Remove the fixing or unscrew the defective bulb from your Kia Carens
- Compare it with the new one to make sure it matches
- Put the new bulb down gently, then fix it correctly
- Replace the rubber cover then all the components in reverse
Now that everything is in place, check that it works! The latter should have an intensity equal to the other. It is important to have perfectly similar models.
How to properly configure the headlights of a Kia Carens
Now that the fire is in place, it is possible that it has been disturbed. It is very important that two lights at the same height and focused the same way. Among other things so as not to annoy the drivers in the other direction. That is why they must be set correctly. To do this, simply position your automobile facing a wall. First one meter from the wall, then 5 or 6 meters. Thereafter, it is enough to regulate the fire in question in the same way as the other by comparing the halos. If neither of them goes, there are tutorials that can help you.