Whether it's for low beam, high beams or turn signals, the changing a light bulb is an extremely simple to do . But if a fire does not work, you should not wait to replace it. Because many ignore it, but it is reprehensible by a fine of up to 68 euros. Of course, it must first be repaired for safety reasons. So this is how to replace the bulb of a headlight on the Kia Pregio, point by point. In a second step, we will see how to correctly adjust them.
How to replace a Kia Pregio headlight bulb
Now there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side now, and a lot of bulbs LED . They consume much less energy and are more resistant. Whatever the type of bulb, the way to replace them will be identical. Here is the procedure to follow for replace the bulb of your Kia Pregio .
- Disconnect the battery in order to work more serenely.
- Clear access to the rear portion of the light. Sometimes it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the damaged bulb from the Kia Pregio
- Compare it well with the new one to be sure that it is suitable
- Put the new bulb down gently, then fix it correctly
- Reclip the rubber cover and all the elements following the reverse procedure
Now that everything is in place, check that it works! This should have an intensity similar to the other. It is essential to have perfectly similar products.
How to set the headlights of a Kia Pregio
Now that the fire is in place, it remains possible that it is out of order. It is very important that two lights at the same height and focused the same way. In particular not to upset the conductors opposite. That is why they must be set correctly. To do this, you must place your automobile in front of a wall. First a meter from the wall, then 5 or 6 meters. In a second step, it is enough to adjust the fire with the new bulb at the same height as the other by comparing the halos. If the two are incorrectly adjusted, there are tutorials that can help you.