That it concerns low beam, high beams or turn signals, the bulb replacement is a very manipulation easy to do . But if a fire does not work, do not delay in changing it. Because some people forget it, but this is condemnable by a fine of up to 68 euros. Of course, they must first be changed for security reasons. So that's how to change the bulb of a headlight on your Kia Pride Kombi, step by step. In a second step, we will see how to correctly adjust them.change-bulb-headlight-Kia-Pride-Kombi

How to change the bulb of a Kia Pride Kombi lighthouse

Nowadays, there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected now, and more and more light bulbs LED . They consume less electricity and are more robust. No matter what type of bulb, the way to change them will be the same. You will find below the logic to follow for change the bulb of your Kia Pride Kombi .

  • Disconnect the battery so that you can work more comfortably.
  • Free access to the rear part of the light. It will be necessary from time to time to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the broken bulb from your Kia Pride Kombi
  • Compare it well with the new one to make sure it fits
  • Place the new bulb gently, then fix it correctly
  • Replace the rubber cover then all the components following the reverse procedure

Now that everything is back in order, check that it works! This should have an intensity similar to the other. It is essential to have perfectly similar products.

How to set the headlights of a Kia Pride Kombi

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and in the same axis. Especially so as not to annoy the motorists you meet. That is why they must be set correctly. To do this, you must position your vehicle in front of a wall. First one meter from the wall, then 5 or 6 meters. In a second step, it is enough to adjust the fire in question at the same height as the other according to the reflections on the wall. If the two are wrong, there are tutorials that can help.