Whether it's for low beam, high beams or turn signals, the changing a light bulb is a very operation simple to do . But if a fire does not work, we should not delay in repairing it. Because some people ignore it, but it is reprehensible by a fine of up to 68 euros. Obviously, they must first be repaired for safety reasons. So here's how to replace the headlight bulb on your Kia Pride, point by point. Next, we will find out how to set them correctly.change-bulb-headlight-Kia-Pride

How to change the bulb of a Kia Pride lighthouse

Now there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side now, and lots of bulbs LED . The latter consume less electricity and are more enduring. Whatever kind of bulb, the way to change them will be similar. So here is the procedure to follow for replace the bulb of your Kia Pride .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear part of the light. At times it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the defective bulb from the Kia Pride
  • Compare it well with the new one to make sure it is suitable
  • Place the new bulb gently, then fix it correctly
  • Replace the rubber cover and all components in reverse order

Now that everything is in order, test the bulb! This one should display the same intensity as the other. It is essential to have totally similar models.

How to adjust the headlights of a Kia Pride

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused the same way. In particular not to disturb the conductors opposite. That's why you have to take the time to adjust them correctly. To do this, you must place your automobile facing a wall. First a short distance, then 5 or 6 meters. Thereafter, you just have to adjust the fire in question at the same height as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.