That it concerns low beam, high beams or turn signals, the changing a light bulb is an extremely manipulation convenient to make . But if a fire never works, it should not be long to repair it. Because many forget it, but it remains punishable by a penalty of up to 68 euros. Obviously, they will first have to be repaired for safety reasons. Here is how you can replace the headlight bulb on your Kia Pro Cee D, step by step. Then we will see how to properly adjust them.change-headlight-bulb-Kia-Pro-Cee-D

How to replace the bulb of a Kia Pro Cee D headlight

Now there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side today, and more and more bulbs LED . They consume less electricity and are more enduring. Whatever the type of bulb, the way to replace them will be similar. You will find below the logic to follow for replace the bulb of your Kia Pro Cee D .

  • Disconnect the battery so that you can work more comfortably.
  • Free access to the rear portion of the fire. Sometimes it will be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the broken bulb of your Kia Pro Cee D
  • Compare it well with the news to make sure it matches
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover then all the elements in the other direction

Once everything is in place, test the bulb! This one should have an intensity equal to the other. It is important to have completely identical products.

How to properly configure the headlights of a Kia Pro Cee D

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. Especially so as not to upset the drivers you meet. So take the time to settle them properly. To do this, you just have to place your car in front of a wall. First one meter from the wall, then 5 or 6 meters. Then, you just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither of them goes, there are tutorials that can help you.