Whether it's about the low beams, high beams or turn signals, the bulb replacement is a very operation easy to make . But if a fire does not work, it should not be long to repair it. Because many do not know it, but this is condemnable by a sanction which can go up to 68 euros. Obviously, they must first be replaced for safety reasons. So that's how to replace the bulb of a headlight on the Kia Rio 2, step by step. Thereafter, we will find out how to correctly adjust them.change-bulb-headlight-Kia-Rio-2

How to change the bulb of a Kia Rio 2 headlight

Today, there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , a little put on the side now, and a lot of bulbs LED . These are much less greedy in electricity and more enduring. Whatever the type of bulb, the way to change them will be identical. You will find below the logic to follow for replace the bulb of your Kia Rio 2 .

  • Disconnect the battery in order to work more serenely.
  • Clear access to the rear part of the light. It will be necessary to dismantle the battery from time to time, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Remove the fixing or unscrew the broken bulb from your Kia Rio 2
  • Compare it with the new one to be sure it matches
  • Place the new bulb gently, then fix it correctly
  • Replace the rubber cover and all the components in the other direction

Now that everything is in place, check that it works! This should display an intensity equal to the other. It is important to have perfectly similar models.

How to set the headlights of a Kia Rio 2

After replacing a light, it is still possible that it will be out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to annoy motorists opposite. They should therefore be adjusted correctly. To do this, simply place your automobile in front of a wall. To start a short distance, then a few meters. Thereafter, simply adjust the light with the new bulb to the same height as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.