Whether it's for low beam, high beams or turn signals, the changing a light bulb is a super manipulation convenient to execute . But if a fire no longer works, you shouldn't wait to change it. Because some people do not know it, but this remains punishable by a sanction which can go up to 68 euros. Obviously, you will have to replace them first for safety reasons. So here is how to change the headlight bulb on your Kia Sorento 2, point by point. In a second step, we will see how to properly adjust them.change-bulb-headlight-Kia-Sorento-2

How to change the bulb of a Kia Sorento 2 headlight

Today there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side today, and a lot of bulbs LED . The latter consume much less electricity and are more enduring. Whatever the type of bulb, the way to change them will be the same. Here is the logic to follow in order to change the bulb of your Kia Sorento 2 .

  • Disconnect the battery so that you can work more serenely.
  • Free access to the rear part of the light. From time to time it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Unclip or unscrew the broken bulb from your Kia Sorento 2
  • Compare it with the new one to be sure it is suitable
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the components in the other direction

Once everything is back in order, check that it works! This one should display a similar intensity to the other. It is essential to have completely similar products.

How to adjust the headlights of a Kia Sorento 2

After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to hinder motorists in the other direction. This is why we must take the time to adjust them properly. To do this, you just have to place your vehicle facing a wall. First a meter from the wall, then a few meters. Secondly, it suffices to adjust the light with the new bulb in the same way as the other by comparing the halos. If both are incorrectly set, there are tutorials that can help you.