Whether it's for low beam, high beams or turn signals, the changing a light bulb is a very operation convenient to make . But if a fire does not work, we must not delay in changing it. Because many forget it, but it is punishable by a penalty of up to 68 euros. Of course, it will first be necessary to repair them for safety reasons. So here is how to change the headlight bulb on the Kia Stonic, point by point. In a second step, we will find out how to properly adjust them.change-bulb-headlight-Kia-Stonic

How to change the bulb of a Kia Stonic headlight

Today, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly neglected now, and lots of bulbs LED . They consume much less electricity and are more resistant. Whatever the type of bulb, the way to change them will be similar. Here is the procedure to follow in order to change the bulb of your Kia Stonic .

  • Disconnect the battery so that you can work more quietly.
  • Free access to the rear portion of the fire. At times it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the defective bulb from your Kia Stonic
  • Compare it with the news to make sure it is suitable
  • Put the new bulb down gently, then fix it properly
  • Replace the rubber cover and all components in reverse order

Now that everything is in order, test the bulb! The latter should have an intensity similar to the other. It is essential to have totally similar products.

How to properly configure the headlights of a Kia Stonic

After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. In particular not to disturb the drivers you meet. That is why they must be settled properly. To do this, simply position your automobile facing a wall. First a meter from the wall, then 5 or 6 meters. In a second step, simply adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are wrong, there are tutorials that can help.