That it concerns low beam, high beams or turn signals, the changing a light bulb is a super operation easy to make . But if a fire stops working, you should not wait to repair it. Because many do not know it, but this is punishable by a fine which can go up to 68 euros. Of course, you will first have to change them for safety reasons. So that's how to replace a headlight bulb on the Lancia Appia, step by step. Next, we will find out how to properly adjust them.
How to replace the bulb of a Lancia Appia lighthouse
Nowadays, there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly neglected now, and lots of bulbs LED . They consume much less electricity and are more resistant. Regardless of the type of bulb, the way to replace them will be similar. So here is the procedure to follow for replace the bulb of your Lancia Appia .
- Disconnect the battery so that you can work more comfortably.
- Clear access to the rear part of the light. At times it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb from the Lancia Appia
- Compare it well with the new one to make sure it matches
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all the elements in the other direction
Now that everything is in order, test the bulb! This one should display the same intensity as the other. It is important to have completely identical models.
How to properly configure the headlights of a Lancia Appia
Now that the fire is in place, it is plausible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to annoy motorists in the other direction. They must therefore be settled properly. To do this, you must place your vehicle in front of a wall. First a short distance, then 5 or 6 meters. Thereafter, you just have to adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are incorrectly adjusted, there are tutorials that can help you.