That it concerns low beam, high beams or turn signals, the changing a light bulb is a very repair convenient to execute . But if ever a fire does not work, one should not wait to replace it. Because some people forget it, but it is punishable by a fine which can go up to 68 euros. Of course, you will have to change them first for security reasons. Here is therefore how to change the bulb of a headlight on a Lancia Aurelia, point by point. Secondly, we will see how to properly adjust them.changing-headlight-bulb-Lancia-Aurelia

How to replace the bulb of a Lancia Aurelia headlight

Nowadays, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly neglected today, and lots of bulbs LED . They consume less electricity and are more robust. Regardless of the type of bulb, the way to replace them will be similar. Here is the logic to follow in order to change the bulb of your Lancia Aurelia .

  • Disconnect the battery so that you can work more serenely.
  • Free access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the defective bulb of the Lancia Aurelia
  • Compare it with the new one to make sure it is suitable
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements in reverse order

Now that everything is back in order, check that it works! The latter should have the same intensity as the other. It is essential to have completely similar models.

How to set the headlights of a Lancia Aurelia

Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. In particular so as not to annoy the drivers opposite. They must therefore be properly adjusted. To do this, you must position your car in front of a wall. First one meter from the wall, then five or six meters. Secondly, it suffices to adjust the fire in question to the same height as the other according to the reflections on the wall. If the two are badly set, there are some very well-made tutorials on this subject.