Whether it's about the low beams, high beams or turn signals, the changing a light bulb is an extremely repair easy to execute . But in the event that a fire does not work, do not wait to fix it. Because some people forget it, but it remains condemnable by a fine which can go up to 68 euros. Of course, it will first be necessary to replace them for safety reasons. This is how to change the headlight bulb on your Lancia Delta 2 Hf, step by step. In a second step, we will find out how to properly adjust them.change-headlight-bulb-Lancia-Delta-2-Hf

How to replace the bulb of a Lancia Delta 2 Hf headlight

Now there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side now, and a lot of bulbs LED . They consume much less electricity and endure more. Whatever the type of bulb, the way to replace them will be the same. So this is the logic to follow for change the bulb of your Lancia Delta 2 Hf .

  • Disconnect the battery to work more comfortably.
  • Clear access to the rear portion of the light. From time to time it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Unclip or unscrew the damaged bulb from your Lancia Delta 2 Hf
  • Compare it well with the new one to make sure it is suitable
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover then all the components in the opposite direction

Now that everything is in place, check that it works! The latter should display an intensity equal to the other. It is essential to have completely identical models.

How to configure the headlights of a Lancia Delta 2 Hf

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused in the same way. Among other things so as not to annoy motorists in the other direction. It is therefore advisable to take the time to adjust them properly. To do this, all you have to do is position your vehicle facing a wall. First a meter from the wall, then a few meters. Secondly, you just have to adjust the light in question to the same height as the other by comparing the halos. If the two are set incorrectly, there are some very well-done tutorials on this.