Whether it's for low beam, high beams or turn signals, the changing a light bulb is a very manipulation easy to execute . But if a fire does not work, do not delay in replacing it. Because some people do not know it, but it is punishable by a fine of up to 68 euros. Obviously, it will first be necessary to repair them for safety reasons. Here is how to change the bulb of a headlight on your Lancia Delta 2, point by point. Thereafter, we will see how to properly settle them.change-headlight-bulb-Lancia-Delta-2

How to replace the bulb of a Lancia Delta 2 headlight

Today, there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side now, and lots of bulbs LED . The latter consume much less electricity and are more enduring. Regardless of the type of bulb, the way to replace them will be similar. So that's the logic to follow for change the bulb of your Lancia Delta 2 .

  • Disconnect the battery so that you can work more comfortably.
  • Clear access to the rear portion of the light. At times it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the damaged bulb from the Lancia Delta 2
  • Compare it well with the new one to make sure it is suitable
  • Put the new bulb down gently, then fix it properly
  • Replace the rubber cover and all the elements following the reverse procedure.

Now that everything is in order, test the bulb! The latter should have an intensity equal to the other. It is essential to have perfectly identical products.

How to properly adjust the headlights of a Lancia Delta 2

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to annoy motorists in the other direction. That is why we must take the time to settle them properly. To do this, simply position your automobile in front of a wall. First a short distance, then a few meters. Thereafter, simply adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.