Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a very repair easy to perform . But if a fire never works, you should not wait to repair it. Because some people forget it, but this is punishable by a fine which can go up to 68 euros. Of course, they must first be changed for security reasons. So that's how to change the bulb of a headlight on a Mazda Sassou, point by point. Secondly, we will see how to correctly adjust them.
How to replace the bulb of a Mazda Sassou headlight
Today there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat put on the side now, and lots of bulbs LED . These are much less energy intensive and more enduring. Regardless of the type of bulb, the way to replace them will be the same. Here is the procedure to follow in order to change the bulb of your Mazda Sassou .
- Disconnect the battery to work more comfortably.
- Clear access to the rear portion of the light. Sometimes it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the fire
- Unclip or unscrew the defective bulb from the Mazda Sassou
- Compare it with the new one to make sure it fits
- Place the new bulb gently, then fix it correctly
- Replace the rubber cover and all of the components in reverse order
Now that everything is in place, test the bulb! The latter should display the same intensity as the other. It is essential to have completely identical products.
How to adjust the headlights of a Mazda Sassou
Now that the fire is in place, it is possible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. Especially so as not to annoy the motorists you meet. That's why you have to take the time to adjust them correctly. To do this, you must position your automobile in front of a wall. First a short distance, then 5 or 6 meters. Second, you just have to adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If neither of them goes, we find tutorials very well done on this subject.