Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a super operation simple to execute . But when a fire stops working, you should not wait to repair it. Because some people forget it, but it is punishable by a penalty of up to 68 euros. Of course, it will first of all have to be changed for safety reasons. Here is how to change the bulb of a headlight on your Opel Movano Combi, step by step. Thereafter, we will see how to properly settle them.change-headlight-bulb-Opel-Movano-Combi

How to change the bulb of a Opel Movano Combi headlight

Today, there are several types of headlight bulbs. The most common are halogen , but we can also find Xenon , slightly put on the side today, and more and more bulbs LED . They consume much less electricity and are more enduring. Whatever the type of bulb, the way to change them will be identical. You will find below the procedure to follow for change the bulb of your Opel Movano Combi .

  • Disconnect the battery so that you can work more comfortably.
  • Free access to the rear portion of the fire. It will sometimes be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the damaged bulb from the Opel Movano Combi
  • Compare it well with the news to make sure it matches
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the components by following the reverse procedure.

Now that everything is back in order, check that it works! This one should have the same intensity as the other. It is important to have completely identical models.

How to properly adjust the headlights of an Opel Movano Combi

Now that the fire is in place, it remains plausible that the latter is out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to upset the drivers you meet. They should therefore be adjusted properly. To do this, you need to position your car facing a wall. First a short distance, then 5 or 6 meters. Thereafter, you will just have to adjust the fire in question in the same way as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.