That it concerns low beam, high beams or turn signals, the changing a light bulb is a very repair convenient to make . But when a fire does not work, it should not be delayed to change it. Because some people forget it, but it remains condemnable by a fine of up to 68 euros. Of course, you will have to change them first for safety reasons. So here is how to change the headlight bulb on your Renault Clio 3 Rs, step by step. In a second step, we will see how to correctly adjust them.
How to replace the bulb of a Renault Clio 3 Rs headlight
Today there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side now, and lots of bulbs LED . They are much less energy-intensive and more robust. Regardless of the type of bulb, the way to replace them will be similar. Below is the logic to follow for change the bulb of your Renault Clio 3 Rs .
- Disconnect the battery in order to work more quietly.
- Free access to the rear portion of the fire. At times it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the defective bulb of the Renault Clio 3 Rs
- Compare it well with the news to be sure it fits
- Put the new bulb down gently, then fix it correctly
- Reclip the rubber cover and then all of the components, following the reverse procedure
Once everything is in place, check that it works! The latter should have the same intensity as the other. It is essential to have perfectly similar models.
How to configure the headlights of a Renault Clio 3 Rs
After replacing a light, it remains plausible that it will be out of order. It is very important that two lights at the same height and in the same axis. Notably so as not to upset the drivers opposite. It is therefore advisable to take the time to adjust them correctly. To do this, simply position your vehicle facing a wall. First a short distance, then a few yards. Secondly, it suffices to adjust the fire in question in the same way as the other by comparing the halos. If the two are badly adjusted, there are tutorials that can help you.