Whether it's about the low beams, high beams or turn signals, the bulb replacement is an extremely convenient to perform . But if a fire never works, you should not wait to repair it. Because some people ignore it, but it is reprehensible by a fine which can go up to 68 euros. Of course, you will have to replace them for security reasons first. Here is how you can change the headlight bulb on your Renault Clio 4 Rs, step by step. In a second step, we will find out how to set them correctly.change-bulb-headlight-Renault-Clio-4-Rs

How to change the bulb of a Renault Clio 4 Rs headlight

Now there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly neglected today, and more and more bulbs LED . These are much less greedy in electricity and more resistant. No matter what kind of bulb, the way to change them will be the same. You will find below the logic to follow for change the bulb of your Renault Clio 4 Rs .

  • Disconnect the battery so that you can work more quietly.
  • Free access to the rear portion of the fire. It will sometimes be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the defective bulb from your Renault Clio 4 Rs
  • Compare it with the new one to make sure it fits
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all components in reverse order

Now that everything is in place, check that it works! The latter should have the same intensity as the other. It is essential to have totally similar models.

Configure the headlights of a Renault Clio 4 Rs

After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to hinder motorists in the other direction. They must therefore be set correctly. For this, you just have to place your car in front of a wall. To start a short distance, then 5 or 6 meters. In a second step, you just have to adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are wrong, there are tutorials that can help you.