Whether it's for low beam, high beams or turn signals, the bulb replacement is a super manipulation easy to perform . But in case a fire does not work, it should not be long to change it. Because many ignore it, but this is reprehensible by a sanction which can go up to 68 euros. Of course, they must first be replaced for safety reasons. Here is therefore how to replace the headlight bulb on a Renault Dezir, point by point. In a second step, we will see how to properly adjust them.
How to replace the bulb of a Renault Dezir headlight
Today, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side now, and more and more bulbs LED . They consume much less electricity and are more enduring. Regardless of the type of bulb, the way to replace them will be similar. You will find below the procedure to follow for replace the bulb in your Renault Dezir .
- Disconnect the battery so that you can work more quietly.
- Free access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or else covers.
- Remove the rubber or plastic cover on the back of the fire
- Remove the fixing or unscrew the damaged bulb from your Renault Dezir
- Compare it well with the new one to be sure that it is suitable
- Place the new bulb gently, then fix it properly
- Reclip the rubber cover then all the components in the opposite direction
Once everything is in order, check that it works! The latter should have an intensity equal to the other. It is important to have perfectly similar products.
Adjusting the headlights of a Renault Dezir
After replacing a light, it remains plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to upset the drivers you meet. That is why they must be settled properly. To do this, simply position your car in front of a wall. First a short distance, then 5 or 6 meters. In a second step, you will just have to adjust the light with the new bulb at the same height as the other by comparing the halos. If the two are poorly tuned, there are very good tutorials on this.