Whether it's about the low beams, high beams or turn signals, the bulb replacement is a very repair simple to perform . But if ever a fire does not work, it should not be delayed to change it. Because many forget it, but this remains punishable by a fine of up to 68 euros. Of course, you will have to change them first for safety reasons. Here is therefore how to change the bulb of a headlight on the Renault Espace 2, point by point. Second, we will find out how to properly adjust them.change-bulb-headlight-Renault-Espace-2

How to replace the bulb of a Renault Espace 2 headlight

Nowadays, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , a little neglected today, and more and more bulbs LED . The latter consume much less electricity and are more resistant. Whatever the type of bulb, the way to replace them will be the same. Here is the logic to follow in order to change the bulb of your Renault Espace 2 .

  • Disconnect the battery to work more comfortably.
  • Free access to the rear part of the light. At times it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Unclip or unscrew the broken bulb from your Renault Espace 2
  • Compare it well with the news to be sure it matches
  • Position the new bulb gently, then fix it correctly
  • Replace the rubber cover then all the components in reverse order

Now that everything is in place, check that it works! This one should have the same intensity as the other. It's important to have perfectly similar models.

How to configure the headlights of a Renault Espace 2

After replacing a light, it is still possible that it will be out of order. It is extremely important that two lights at the same height and focused in the same way. Among other things so as not to upset the drivers in the other direction. That is why they must be set correctly. For that, you just have to place your car facing a wall. At first a short distance, then a few meters. Second, it is sufficient to adjust the fire in question to the same height as the other by comparing the halos. If neither of the two works, there are tutorials that can help you.