That it concerns low beam, high beams or turn signals, the changing a light bulb is a very manipulation convenient to execute . But if a fire does not work, you should not wait to replace it. Because some people ignore it, but this is condemnable by a fine which can go up to 68 euros. Obviously, you have to start repairing them for safety reasons. Here is how to replace the headlight bulb on a Renault Frendzy, step by step. Thereafter, we will see how to correctly adjust them.change-headlight-bulb-Renault-Frendzy

How to replace the bulb of a Renault Frendzy headlight

Now there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side now, and more and more bulbs LED . They consume much less energy and are more enduring. Regardless of the type of bulb, the way to replace them will be similar. Here is the procedure to follow for replace the bulb in your Renault Frendzy .

  • Disconnect the battery so that you can work more serenely.
  • Free access to the rear part of the light. It will be necessary from time to time to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the damaged bulb from the Renault Frendzy
  • Compare it well with the new one to make sure it fits
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all of the components, following the reverse procedure.

Now that everything is in place, test the bulb! This one should display the same intensity as the other. It is essential to have totally similar models.

Configure the headlights of a Renault Frendzy

Now that the fire is in place, it is plausible that the latter is out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to obstruct the conductors in the other direction. That is why they must be set correctly. To do this, simply place your automobile facing a wall. First a meter from the wall, then a few meters. Then, you just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither goes, there are tutorials that can help you.