Whether it's for low beam, high beams or turn signals, the changing a light bulb is an extremely repair easy to execute . But if ever a fire does not work, we should not wait to replace it. Because many ignore it, but it remains punishable by a fine of up to 68 euros. Of course, they must first be repaired for safety reasons. Here is therefore how to replace the bulb of a headlight on a Renault Grand Kangoo, step by step. Subsequently, we will find out how to properly adjust them.
How to change the bulb of a Renault Grand Kangoo headlight
Now there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , a little neglected today, and more and more bulbs LED . The latter are much less energy-intensive and more enduring. Regardless of the type of bulb, the way to change them will be the same. Here is the process to follow for replace the bulb of your Renault Grand Kangoo .
- Disconnect the battery to work more comfortably.
- Clear access to the rear part of the light. At times it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the damaged bulb from your Renault Grand Kangoo
- Compare it well with the new one to be sure it fits
- Place the new bulb gently, then fix it properly
- Reclip the rubber cover then all the elements in reverse
Now that everything is in place, check that it works! The latter should have a similar intensity to the other. It is essential to have completely similar models.
How to configure the headlights of a Renault Grand Kangoo
Now that the fire is in place, it may be out of order. It is very important that two lights at the same height and focused in the same way. In particular so as not to disturb the drivers in front. We must therefore take the time to adjust them properly. To do this, you just have to position your car facing a wall. To start a short distance, then a few yards. Subsequently, it suffices to adjust the fire in question in the same way as the other by comparing the halos. If the two are set incorrectly, there are some very well-made tutorials out there.