Whether it's for low beam, high beams or turn signals, the changing a light bulb is a super manipulation convenient to make . But if a fire does not work, it should not be long before replacing it. Because many do not know it, but it is condemnable by a sanction which can go up to 68 euros. Of course, you will have to replace them for security reasons first. Here is how to change the bulb of a headlight on the Seat 124, point by point. Next, we will see how to properly adjust them.
How to change the bulb of a Seat 124 headlight
Now there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side now, and more and more bulbs LED . These are less energy intensive and more resistant. No matter what kind of bulb, the way to change them will be similar. Here is the procedure to follow in order to change the bulb in your Seat 124 .
- Disconnect the battery so that you can work more quietly.
- Clear access to the rear portion of the light. At times it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the broken bulb from the Seat 124
- Compare it with the news to make sure it fits
- Put the new bulb down gently, then fix it properly
- Replace the rubber cover and all the components, following the reverse procedure
Now that everything is in order, check that it works! The latter should have the same intensity as the other. It is important to have completely similar products.
How to adjust the headlights of a Seat 124
Now that the fire is in place, it remains plausible that it is out of order. It is extremely important that two lights at the same height and focused the same way. In particular not to annoy the drivers you meet. They must therefore be settled properly. To do this, you just have to position your vehicle facing a wall. To start a short distance, then 5 or 6 meters. Thereafter, simply adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.