Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely repair simple to make . But if a fire does not work, you should not wait to replace it. Because many forget it, but this remains reprehensible by a penalty which can go up to 68 euros. Obviously, they will have to be replaced first for safety reasons. This is therefore how to replace the bulb of a headlight on the Seat 127, point by point. Second, we will find out how to properly adjust them.
How to change the bulb of a Seat 127 headlight
Nowadays, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat neglected today, and many bulbs LED . These are less energy consuming and more resistant. Whatever the type of bulb, the way to change them will be identical. Here is the logic to follow in order to replace the bulb in your Seat 127 .
- Disconnect the battery so that you can work more quietly.
- Free access to the rear part of the light. At times it will be necessary to disassemble the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the broken bulb from the Seat 127
- Compare it with the new one to make sure it fits
- Place the new bulb gently, then fix it properly
- Replace the rubber cover then all the elements in the other direction
Once everything is in place, check that it works! The latter should have an intensity equal to the other. It is essential to have completely identical models.
How to set the headlights of a Seat 127
Now that the fire is in place, it remains plausible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to upset the conductors opposite. They must therefore be settled properly. To do this, you must position your vehicle facing a wall. First one meter from the wall, then 5 or 6 meters. Secondly, simply adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If neither of them goes, we find tutorials very well done on this subject.