Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely convenient to do . But if a fire does not work, you should not delay in changing it. Because some people ignore it, but it remains punishable by a penalty of up to 68 euros. Of course, we will first have to change them for security reasons. So this is how to replace the bulb of a headlight on the Seat 850, point by point. In a second step, we will find out how to properly adjust them.
How to change the bulb of a Seat 850 headlight
Today, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly put on the side now, and more and more bulbs LED . They are much less energy intensive and more resistant. No matter what kind of bulb, the way to change them will be the same. You will find below the procedure to follow in order to replace the bulb in your Seat 850 .
- Disconnect the battery so that you can work more quietly.
- Free access to the rear part of the light. At times it will be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the damaged bulb from your Seat 850
- Compare it with the news to make sure it is suitable
- Position the new bulb gently, then fix it properly
- Replace the rubber cover and all the components, following the reverse procedure
Once everything is in order, test the bulb! This one should have the same intensity as the other. It is essential to have perfectly similar products.
How to set the headlights of a Seat 850
Now that the fire is in place, it is possible that it is out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to hinder motorists in the other direction. They should therefore be adjusted properly. To do this, you must position your automobile in front of a wall. First one meter from the wall, then 5 or 6 meters. In a second step, it is enough to adjust the light in question at the same height as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.